PQ Series
Version
1
Registered Product Information
Manufacturer:
Prosense
Product Name:
PQ Series
Product Description:
Gas Detector
Protocol:
HART
Category:
Gas Detection,Gas
Profile:
HART Field Device
Date:
9/22/2023
More Information:
Prosense "PQ" Series fixed gas detectors have been designed and developed for the demanding conditions of the industry in order to perform continuous measurement of combustible, toxic, asphyxiate, and VOC gases in the environment.
With ATEX / IECEx, SIL2 certifications, EN 60079-29: 1 performance approval and high ingress protection class, it has proved its suitability for harsh environmental conditions.
PID, Pellistor, Electrochemical, Infrared, Semiconductor sensors employed PQ provides excellent output in LEL, ppm,ppb and VOL ranges.
Trustworthy Certification : PROSENSE "PQD" Series fixed gas detectors are certified with ATEX/IECEx/UL/INMETRO/UKEX and Functional Safety.
Ex-proof Safety : The continuous measurement of toxic and explosive gases is done safely in hazardous areas thanks to the ex-proof housing.
Performance Approval : It complies with the measurement performance criteria in accordance with the IEC EN 60079-29-1 standard.
Functional Safety : Prosense promotes SIL approved products to reduce safety risks associated with increasingly complicated systems as malfunctioning equipment could pose a potential risk. Prosense PQ Series is certified by TUV Rheinland as SIL2 and SIL3 functional safety level.
Robust and Durable : SS316 stainless steel sensor head performs perfectly under harsh environmental conditions with the IP65/IP66 protection class.
Easy Maintenance : PQD Series detectors allow sensor replacement with pre-calibrated sensor head thanks to the Procell technology.
OLED Display : The OLED screen can be easily read from any angle.
SAFELOG Data Logger : PQD Series records status up to 250 events. In case of sudden power cut, you can save the data thanks to the cell battery.
Automatic Calibration : Detector calibration can be done automatically via preset values recorded in detector software once calibration requirements are provided.
Pellistor-Saver Mode : Detectors power off the sensor in high gas concentration in order to properly secure the operational lifetime of pellistor sensor. Auto Analog Signal Calibration and Monitoring PQD Series detectors continuously check the analog output signal level to match the measurement level before promptly transferred to the panel. PQD Series adjusts the signal level in case of any deviation and generates a fault signal when the adjustment fails.
Zero Suppression : Adjusting, the detector can show a certain measurement level as 0 (zero) to avoid unnecessary concerns.
Simple External Equipment Control : Optional relay module enables you to use it as an independent gas detection system with two arbitrarily adjustable concentration alarms and one fault alarm.
Continuous Self-Test : The detectors check itself continuously to make sure it operates perfectly and indicates a fault in case of any failure.
Adjustable Parameters : All parameters can be easily changed according to the application requirements
or facility standards.
Remote Display : Depending on the application requirements, the screen can be placed separately.
Easy Status Recognition : Colored LEDs (green, yellow and red) provide additional alarm and status information.
Maintenance via Software : Prosense provides software to maintain your active system easily and calibrate the gas detectors properly via computer.
Applications : Oil&Gas, Petrochemical, Onshore/Offshore, Steel-Metal Industry, Chemical Industry, Process Industry, Gas Distribution Stations, Water Treatment Plants.
Registered Product Details
Manufacturer ID (hex):
006154
Device Type ID (hex):
E541
DEV_REV (hex):
0x01
DD Revision:
0x01
Technology Version:
7
Wireless Product:
No
Registration Information
Registration Authority:
FieldComm Group
Registration Status:
Registered
Contact Information
Website:
http://www.prosense.com.tr
Device Support File Usage
FieldComm Group (FCG) makes available to its members and to the public certain device driver (DD) files, in various forms, that have passed certain tests conducted by or through FCG. The DD files are, or are created from, submissions to FCG by FCG members and are provided by FCG AS IS. FCG disclaims all liability for the accuracy, suitability or use of the DD files. Each member creating DD files has its own policies regarding supporting use of those files, and may, for instance support use of DD object code files, but not DeviceInfo or other files. While FCG is under no obligation to provide support for use of any DD files, FCG welcomes all inquiries on the subject and will often be able to assist.