Manufacturer:
AMETEK Magnetrol
Product Name:
Thermatel Enhanced Model TA2 2x
Product Description:
Thermal Mass Flow Transmitter
Profile:
FOUNDATION Field Device
More Information:
Obtain mass flow measurement of air and gas from Magnetrol's TA2 Thermal
Mass Flow Meter. The TA2 also provides excellent low flow sensitivity,
high turndown rates, low pressure drop with NIST traceable calibrations.
In addition to the direct measurement of the mass flow, the totalized
flow and temperature measurement are also provided.
Used with either an insertion probe or a flow body the TA2 can be used on
pipe sizes as small as ½". Insertion probe lengths up to 100 inches
constructed from either Stainless Steel or Hastelloy C. Available with
a variety of process connections including compression fittings, flanges,
and Retractable Probe Assemblies. Useable for gas temperatures up to
400° F (200° C) and process pressures to 1500 psi (100 Bar). Both
integral and remote electronics are provided.
Each unit is factory calibrated and configured for the application; no
field set up is required greatly simplifying installation. The display
on the TA2 can be viewed in multiple languages including English, French,
German, Spanish and Russian for worldwide use.
The TA2 permits field verification of the calibration following a simple
procedure programmed into the TA2 firmware.
Manufacturer ID (hex):
000156
Device Type ID (hex):
0004
DEV_REV (hex):
01
DD Revision:
0x01, 0x01(DD5)
FOUNDATION Physical Layer Profile:
114 - Standard-power signaling, separately powered, non I.S.
124 - Low-power signaling, separately powered, non I.S.
Stack Manufacturer:
Softing AG
FOUNDATION Stack Class:
31PS, 32L
Stack Version:
2.30
Registered Blocks:
1-RB2(e), 5-AI(s), 1-IT(s), 1-PID(s)
Other Blocks:
1-TB(c)
Registered Features:
Alarms and Events
Function Block Linking
Trending
Multi-bit Alert Reporting
Field Diagnostics
Registration Authority:
FieldComm Group
Registration Status:
Registered
Tester Version:
5.2.0
DD/CFF Tester Version:
5.2.0