FOUNDATION Field Device
VersaFlow Mag - Honeywell ElectroMagnetic Flowmeters
The VersaFlow family of electromagnetic flowmeters
VersaFlow Mag 100 sandwich solution for cost effective applications.
VersaFlow Mag 1000 flanged solution for water- and wastewater
VersaFlow Mag 4000 flanged solution for any process application, ranging
from water to dredging and from mining to paper & pulp.
VersaFlow Mag 2000-SW sandwich solution for laboratory, chemical and food
& beverage applications.
VersaFlow Mag 2000-FL flanged solution for chemical and paper & pulp
VersaFlow Mag 3000 sanitary/hygienic solution for food & beverage and
No limit with liner/electrode/flange materials
Liner: PFA, PP, PTFE, ETFE, PU, Rilsan?, rubber, ceramic, etc. Electrode:
Hastelloy, stainless steel, Tantalum, Titanium, Platinum, low-noise, etc.
Flange: carbon steel, stainless steel, Duplex, 6Mo, etc.
No limit with flow
From 0.002 to 30,000 m3/h with a full range of meters for low, normal and
bulk flow applications.
No limit with measured product
Minimum electrical conductivity >1µS/cm; gas content up to 5%; solid
content up to 70%.
No limit with installation
Shortest straight in- and outlet length; any installation position;
bi-directional measurement; extensive self-diagnostics.
No limit with electronics
VersaFlow Mag has been designed to be used with a selection of standard
electronics, one variant for basic applications and one for demanding
applications. All electronics are available in compact as well as
separate design (up to 600m) and can be used in safe as well as hazardous
areas. Calibration-, configuration- and programming data is stored inside
the electronics backplane for easy recovery after possible exchange.
No limit with applications
Honeywell can provide metering solutions whatever your requirement
including: volume flow, mass flow (with given density), flow velocity,
electrical conductivity and coil temperature.
VersaFlow Mag features
* Fully programmable electronics providing a choice of multiple outputs
* Modular signal converter for greater flexibility
* Largest range available on the market (DN2,5...3000)
* Flow handling from 0.002...30,000m3/h
* Temperature range from -40...+180°C
* Compliance with 3A, ACS, DVGW, EHEDG, KTW, NSF, WRc standards and
using FDA approved materials
* 6 standard sensors, 2 standard converters and 5 dedicated flowmeter
* Approved for hazardous area applications, incl. ATEX, FM, CSA, GOS
VersaFlow Mag - One for all applications
With just two signal converters and the widest range of flow sensors, the
VersaFlow Mag family covers all applications, from a simple water
measurement to corrosive or abrasive products or even pulp in the paper
industry. Simplified engineering, procurement and inventory lead to
cost-savings for the user. This new concept marks a new era, and is the
result of more than 55 years experience in electromagnetic flowmetering.
Sets the standards in electromagnetic flowmetering
Using brand new technology increased the measuring performance of
VersaFlow Mag even further. These improvements are particularly useful
where today's meters begin to capitulate. Examples of this include very
low conductivity, measurement of rapid product changes with corresponding
changes in pH or the measurement of pulp in the paper industry. This
increase in performance was possible by a 30-fold improvement in the
measuring technology components. Here we exploited all known optimization
Manufacturer ID (hex):
Device Type ID (hex):
FOUNDATION Physical Layer Profile:
112 - Standard-power signaling, separately powered, Entity Model I.S.
512 - Low-power signaling, separately powered, FISCO I.S.
FOUNDATION Stack Class:
1-RB2(e), 3-AI(s), 1-PID(s), 2-IT(s)
Alarms and Events
Function Block Linking
Multi-bit Alert Reporting